Free download
RFQ drawing templates
Four free RFQ drawing templates: a bushing or sleeve, a shaft sleeve for a pump or motor, a stud and a shoulder bolt. Each is a one-page PDF you can type into or print, with a dimensioned outline, a blank for every dimension, and a notes block for material, finish, quantity and need date. A DXF of the same outline comes with each. No sign-up. Fill one in, send it with your RFQ, and the quote comes back in 24-48 hours.
Updated November 2026
Before you send it
A template shows what to fill in. It gives no fit, clearance or design advice. MI CNC Parts does not set the fit or the running clearance.
The stud and shoulder bolt sheets ask for the material and, if the print has one, the hardness. They have no field for a grade or property class.
The four templates
-
Bushing or sleeve
Outside diameter, inside diameter, length, flange and one groove, each with a space for the size and the tolerance or fit callout.
Part page: Custom bushings and sleeves
-
Shaft sleeve for a pump or motor
The sleeve dimensions, the O-ring groove and set-screw holes, plus a block for the dimensions you measured when there is no print.
Part page: Pump shaft sleeves
-
Stud
The thread and thread length at each end, the overall length, the body, the points, and the material, hardness and finish.
Part page: Custom studs
-
Shoulder bolt
Shoulder diameter and length, the thread, the relief, the head, and the material, hardness and finish.
Part page: Custom shoulder bolts
Fill it in and send it
- Type into the PDF, or print it and write on it. Each letter on the outline matches a row in the table. The DXF carries the same outline and letters.
- A filled-in sheet is quoted like a fully dimensioned drawing. The filled-in sheet is the print the parts are inspected against.
- Send the sheet on the quote page. Any file type; STEP + PDF ideal. See what file to send and how to order.
- Ask for more than one quantity, such as 1, 25 and 100, and the quote shows each.
- No print for a shaft sleeve? Its sheet has a block for the shaft diameter you measured and the fit you want at the bore. Sending a sample to be measured through reverse engineering instead? Send a new part, not the worn one. Wear changes the sizes that matter.
- Certificates and inspection reports: what ships with an order.
Questions
01 Do I need to sign up to download a template?
No. Each link above downloads the file directly. There is no form and no email step.
02 I already have a drawing. Do I need a template?
No. Send your drawing. A template is for when there is no drawing yet.
03 What if my part does not match the outline?
Write the difference under Other callouts or in Notes, or sketch on a printed copy. From a sketch or photos alone, the 3D model is built from what you send and quoted as its own line.
04 Inches or millimeters?
Either. Write in or mm in the Units field and keep to it across the sheet.
Get Started
Send us your files.
We’ll take it from there.
A quote in 24-48 hours, no minimums. Like the quote, and we’ll make your parts and ship them to you.
Get a Quote