Custom Fasteners
Custom Bolts: Special and Replacement Bolts to Your Print
MI CNC Parts quotes custom bolts to your print or from a new sample part: special, replacement and machined bolts with a length, head, thread or material no catalog lists, in hardened steel, 304 and 316 stainless, brass, bronze and titanium. Stock hardware is not sold here. There is no minimum, from one bolt to production runs of 10,000. Upload the print on the quote form; a person reads it and replies with a quote in 24-48 hours.
Updated November 2026
Example part, modeled for illustration.
Start Here
Get a Quote in 24-48 Hours
Send us your files and we’ll quote it, usually within 24-48 hours.
Need an NDA before you send files? Ask for one and it’s sent the same day.
Commercial work only. We don’t quote aerospace, firearms, DoD, ITAR, or EAR-controlled parts.
Or email your print to evan@micncparts.com, or call 313-909-6531.
Special and replacement bolts at the length, head, thread and material a catalog does not list.
Before you send it
The fastener is made in the material your print calls for. No strength testing is done, so no grade or property class is claimed or marked.
No C of C or material certifications ship with parts by default. If your PO needs them, say so before the quote. Inspection reports on critical dimensions aren’t included by default. If you need one, ask when you place the order.
What ships with an order covers inspection, inspection reports and certificates in one place.
Every part is inspected against your print before it ships. If a part doesn’t match the print, it’s remade or credited.
What makes a bolt custom, and when it is worth quoting
The table lists what most often takes a bolt off the shelf, and what the print carries for each.
| What changes | Typical case | Put on the print |
|---|---|---|
| Length | An overall or grip length between or beyond catalog steps | Overall length, thread length, and how each is measured |
| Head | A thin, oversize, drilled or shaped head; a square or round neck under the head | Head style, width across flats or diameter, height, and the neck |
| Thread | Fine or extra-fine pitch, left-hand, a longer or shorter thread, a UNS special | The full callout: size, pitch, series and class |
| Body | A close-fit body, a reduced shank, a cross hole or a groove | Each diameter and length, and which diameters are ground |
| Material | A catalog size not stocked in 316, titanium, bronze or hardened 4140 | The grade, and the hardness if the bolt is hardened |
| Finish | Zinc plating, black oxide or a hardness the catalog part does not come in | The finish, and whether thread limits apply before or after plating |
Bolt head standards a print can name
A print can name the standard and dimension only what changes. A head that follows no standard is drawn in full and quoted from the print.
Material and finish: what goes on the print
Bolts are quoted in hardened, heat-treated steel, including 4140, in 304 and 316 stainless, brass, bronze and titanium. Other alloys and plastics quoted on request. Name the grade on the print.
Zinc plating, black oxide and heat treat are quoted with the part. A steel bolt is heat treated to the hardness on the print. A coating adds thickness to a thread, so say on the print whether the thread limits apply before or after plating.
Replacement bolts: what has to match
A replacement bolt is quoted from a print or from a new sample part, and it is made to the dimensions, material and hardness on that print. Parts are supplied as replacements by fit and dimensions. No OEM logos, part numbers or markings are copied. Cast parts are not quoted, either as a casting or as a machined replacement for a part that was originally cast.
Head markings are the one thing a custom bolt does not copy. If the joint calls for a graded bolt, buy the graded catalog part; if it calls for a material and a hardness, put both on the print. Whitworth or BSF bolts are on obsolete thread fasteners, studs on custom studs and shouldered bolts on shoulder bolts.
Ordering: what to send and quantities
- What to send. Start with a print that carries the thread callout, the length and how it is measured, the head, the material, the hardness and the finish. A 2D PDF with every dimension on it needs no CAD line in the quote. A STEP file with no drawing is quoted to a ±0.005 in general tolerance, or the one your notes name, so the thread callout needs a drawing or a note. Position, perpendicularity and runout callouts are quoted from the print. Thread classes and their limits are on custom fasteners.
- From a sketch or a sample. No print yet? A hand sketch with the thread callout and the lengths works, and so does a new sample part or an unused spare. Send a new part, not the worn one. Wear changes the sizes that matter. Reverse engineering measures a sample and makes the drawing. The sample ships back with the parts. The drawing made from a sketch or a sample is quoted as its own line on the first order, and reorders come off the same drawing.
- Quantities. One bolt is a normal order. Ask for more than one quantity, such as 1, 25 and 100, and the quote shows each. For how quantity works on a small lot, see small-batch CNC machining, and for a single replacement, one-off CNC machining. Order a first batch to prove the fit before the run: prototype CNC machining covers the first pieces.
- Files, payment and lead time. Vendor setup takes a day: W-9, NDA and net terms available. How to order CNC parts and what ships with an order cover files, payment, vendor setup, blanket orders and lead time. When a machine is down, start with rush CNC parts.
Reference: bolt or screw, and which word goes on the print
Either word gets a quote; the dimensions decide what is made.
On a print, what matters is whether the part goes through a clearance hole to a nut or into a tapped hole, because that sets the thread length and the fit. Parts that go into a tapped hole and are turned by the head are covered on custom screws.
How long should the thread on a bolt be?
Put the thread length on the print; do not leave it to a convention.
Give the grip, the thread length and the overall length, and say which surface each is measured from. If your print requires rolled threads, say so on the print and the quote answers it.
Questions
Before you send a job.
01 Can you make a replacement bolt to match one I have?
Yes, from a print or from a new sample part or an unused spare. The bolt in the machine is the reason for the order, but it is not what gets measured. If a worn or broken bolt is the only one left, send photos, the thread if you know it and what it clamps, and the reply says what to send.
02 Can a custom bolt be hardened?
Yes. 4140 is a common choice. Put the material and the hardness range on the print.
03 How large or small can a custom bolt be?
M1 is the small end. No maximum size is published: for a large part, send the print. Length and thread length are dimensions on the print like any other.
04 Can you make the nut as well?
A matching nut can go on the same quote, and nuts are quoted to the print. Draw the nut on its own print with its thread, width across flats and height, and name the material so the pair suits each other.
Related
Where to go next.
Custom fasteners
The hub: thread classes, limits and every fastener page.
View →Custom screws
Special screws that go into a tapped hole.
View →Custom shoulder bolts
A ground shoulder, a thread and a head, to your print.
View →Custom studs
Double-end and tap-end studs.
View →Get a quote
Any file type; STEP + PDF ideal, or a new sample part.
View →Get Started
Send us your files.
We’ll take it from there.
A quote in 24-48 hours, no minimums. Like the quote, and we’ll make your parts and ship them to you.
Get a Quote