MI CNC Parts Get a Quote

Custom Fasteners

Custom Screws: Special and Replacement Screws to Your Print

MI CNC Parts quotes custom screws to your print or from a new sample part: special, replacement and machined screws with a head, length, point or material no catalog lists, including socket head, set, thumb, captive and jack screws, in hardened steel, 304 and 316 stainless, brass, bronze and titanium. Stock hardware is not sold here. There is no minimum, from one screw to production runs of 10,000. Upload the print on the quote form and a person replies with a quote in 24-48 hours.

Updated November 2026

Example part, modeled for illustration.

Start Here

Get a Quote in 24-48 Hours

Send us your files and we’ll quote it, usually within 24-48 hours.

Need an NDA before you send files? Ask for one and it’s sent the same day.

Get My Quote

Commercial work only. We don’t quote aerospace, firearms, DoD, ITAR, or EAR-controlled parts.

Special and replacement screws with the head, length, point and material a catalog does not list.

Before you send it

The fastener is made in the material your print calls for. No strength testing is done, so no grade or property class is claimed or marked.

No C of C or material certifications ship with parts by default. If your PO needs them, say so before the quote. Inspection reports on critical dimensions aren’t included by default. If you need one, ask when you place the order.

What ships with an order covers inspection, inspection reports and certificates in one place.

Every part is inspected against your print before it ships. If a part doesn’t match the print, it’s remade or credited.

What makes a screw custom, and when it is worth quoting

The table lists what most often takes a screw off the shelf.

What makes a screw custom, and what the print carries
What changesTypical casePut on the print
LengthA length between or beyond catalog steps; a thread that stops short of the headOverall length, thread length, and how each is measured
HeadA low, thin, oversize or shaped head; a knurled thumb head; wrench flatsHead style, diameter, height, and any flats or knurl
PointA dog, cone or cup point on a set screw; a pilot or a ball seatThe point style with its diameter, length and angle
ShankA reduced shank on a captive screw; a shoulder; a cross hole or a vent holeEach diameter and length, and which diameters are ground
ThreadFine pitch, left-hand, a UNS special, inch at one end and metric at the otherThe full callout: size, pitch, series and class
MaterialA catalog size not stocked in 316, titanium, brass or bronzeThe grade, and the hardness if the screw is hardened

Head styles a custom screw can have

Any head that can be dimensioned can be quoted. Give the style, the head diameter and height, and the drive as your drawing shows it. A head that follows a standard can name the standard and dimension only what differs.

A knurled thumb screw head is dimensioned like the grip of a custom knob. A screw with a ground shoulder is a shoulder screw, covered on custom shoulder bolts.

Set screws, captive screws and jack screws

A special point is the usual reason a set screw is custom: put the point style on the print with its diameter, length and angle, and name the hardness.

Captive screws and jack screws are quoted to the print as well. On a captive screw, give the thread, the reduced shank diameter and its length, and the head. On a jack screw, give the thread, the overall length, the point or pad at the end and the head or flats that turn it.

Material and finish: what goes on the print

Screws are quoted in hardened, heat-treated steel, including 4140, in 304 and 316 stainless, brass, bronze and titanium. Other alloys and plastics quoted on request. Name the grade on the print.

Zinc plating, black oxide and heat treat are quoted with the part. A steel screw is heat treated to the hardness on the print. A coating adds thickness to a thread, so say on the print whether the thread limits apply before or after plating.

Ordering: what to send and quantities

  • What to send. Start with a print that carries the thread callout, the length and how it is measured, the head, the material, the hardness and the finish. A 2D PDF with every dimension on it needs no CAD line in the quote. A STEP file with no drawing is quoted to a ±0.005 in general tolerance, or the one your notes name, so the thread callout needs a drawing or a note. Position, perpendicularity and runout callouts are quoted from the print. Thread classes and their limits are on custom fasteners.
  • From a sketch or a sample. No print yet? A hand sketch with the thread callout and the lengths works, and so does a new sample part or an unused spare. Send a new part, not the worn one. Wear changes the sizes that matter. Reverse engineering measures a sample and makes the drawing. The sample ships back with the parts. The drawing made from a sketch or a sample is quoted as its own line on the first order, and reorders come off the same drawing.
  • Quantities. One screw is a normal order. Ask for more than one quantity, such as 1, 25 and 100, and the quote shows each. For how quantity works on a small lot, see small-batch CNC machining, and for a single replacement, one-off CNC machining. Order a first batch to prove the fit before the run: prototype CNC machining covers the first pieces.
  • Files, payment and lead time. Vendor setup takes a day: W-9, NDA and net terms available. How to order CNC parts and what ships with an order cover files, payment, vendor setup, blanket orders and lead time. When a machine is down, start with rush CNC parts.

What makes a screw a screw, and not a bolt?

A screw goes into a thread in the work and is turned by its head. A fastener made to be tightened with a nut is a bolt, covered on custom bolts.

For the print, that means the thread has to suit the tapped hole it goes into. Say what the screw threads into and how deep, and put the thread length on the print. If your screw needs a plain length under the head, dimension it.

Replacement screws: what has to match

A replacement screw is quoted from a print or from a new sample part, and it is made to the dimensions, material and hardness on that print. Parts are supplied as replacements by fit and dimensions. No OEM logos, part numbers or markings are copied. Cast parts are not quoted, either as a casting or as a machined replacement for a part that was originally cast. BA and BSF screws are on obsolete thread fasteners.

Questions

Before you send a job.

01 Can you make a replacement screw to match one I have?

Yes, from a print or from a new sample part or an unused spare. If a worn or broken screw is the only one left, send photos, the thread if you know it and what it threads into, and the reply says what to send.

02 How small can a custom screw be?

M1 is the small end. No maximum size is published: for a large part, send the print. Very small screws in quantity are often quoted as Swiss screw machining.

03 Can a custom screw be hardened or plated?

Yes. Zinc plating, black oxide and heat treat are quoted with the part, to the hardness and finish on the print.

04 Are you a custom screw manufacturer?

MI CNC Parts is the supplier on the order: it quotes the screw to your print, gets it made and ships it, and the person who read the print and priced it stays your contact through delivery, with no account or portal to set up. The quote comes back in 24-48 hours.

Get Started

Send us your files.
We’ll take it from there.

A quote in 24-48 hours, no minimums. Like the quote, and we’ll make your parts and ship them to you.

Get a Quote